Skytrak 6042 Service Manual User Manual download pdf (Page 141)

100

101

4.21

Model 6042 Legacy Origin 7/02

Cab and Covers

Note: The button-head screw (Fig. 4-35, 1) at the lower

rear position on each side of the heater will be secured

with an insert nut (2).

11. Remove eight button-head screws (Fig. 4-35, 3 and 1),

six nuts (4) and six lockwashers (5).

12. Carefully pull the heater assembly (Fig. 4-35, 6)

forward. Label and disconnect the wiring harness

connections (7) at the blower.

13. Remove the heater assembly (Fig. 4-35, 6).

Figure 4-35 Remove Heater Assembly

14. If the heater assembly is to be replaced: Remove

four hex-slotted capscrews (Fig. 4-36, 1), and

remove the mounting bracket (2) from the heater

assembly (3).

Figure 4-36 Remove Heater Assembly from

Mounting Bracket

b. Heater Assembly Installation

1. Connect the wiring harness connections

(Fig. 4-35, 7) to the blower.

Note: The button-head screw (Fig. 4-35, 1) at the lower

rear position on each side of the heater will be secured

with an insert nut (2).

2. Slide the heater/mounting bracket assembly

(Fig. 4-35, 6) into the seat riser (8), and secure with

eight button-head screws (3 and 1), six

lockwashers (5) and six nuts (4).

MA8730

MA8710

1 2 ... 136 137 138 139 140 141 142 143 144 145 146 ... 543 544

Comments to this Manuals

No comments

Skytrak 6042 Service Manual User Manual Page 141

Comments to this Manuals

Related products and manuals for Special machinery Skytrak 6042 Service Manual