Skytrak 6042 Service Manual User Manual download pdf (Page 60)

100

101

Boom

3.14

Model 6042 Legacy Origin 7/02

b. Remove the capscrews (Fig. 3-30, 1), lockwashers

(2) and flat washers (3) holding the bottom wear

pad (4) and spacer (5) to the intermediate boom.

Label the wear pad and spacer as “Bottom.” Also

note the orientation of the mounting hole offset.

Save the capscrews, lockwashers, flat washers,

spacer and wear pad inserts (6).

Figure 3-30 Intermediate Boom Rear Wear Pads

c. Remove the capscrews (Fig. 3-31, 1), lockwashers

(2) and flat washers (3) holding the upper wear

pads (4) and shims (5) (if present) to the

intermediate boom. Label the wear pads and

shims as “Top Left,” “Top Center” or “Top Right.”

Also note the orientation of the mounting hole

offset. Save the capscrews, lockwashers, flat

washers, shims and wear pad inserts (6).

Figure 3-31 Intermediate Boom Upper Rear Wear Pads

d. Remove the capscrews (Fig. 3-32, 1), lockwashers

(2) and flat washers (3) holding the side wear

pads (4) and shims (5) (if present) to the interme-

diate boom. Label the wear pads and shims as

“Left Side Top” and “Right Side Top/Bottom.”

Also note the orientation of the mounting hole

offset. Save the capscrews, lockwashers, flat

washers, shims and wear pad inserts (6).

Figure 3-32 Intermediate Boom Side Wear Pads

MH1060

MH1070

MH1080

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 543 544

Comments to this Manuals

No comments

Skytrak 6042 Service Manual User Manual Page 60

Comments to this Manuals

Related products and manuals for Special machinery Skytrak 6042 Service Manual