Skytrak 6042 Service Manual User Manual download pdf (Page 486)

100

101

Electrical System

9.116

Model 6042 Legacy Origin 7/02

c. Transmission Upper Valve Body Solenoid

Removal

Note: Before removing the valve body protective cover,

clean the area around the housing to prevent

contamination.

1. Disconnect the negative (–) battery cable at the

negative battery terminal (Fig. 9-102, 1).

Figure 9-102 Battery Cable Connections

2. Remove the six capscrews (Fig. 9-103, 1) four hex-

head capscrews (2), ten lockwashers (3 and 4) and

protective cover plate (5) secured over the

transmission solenoid cartridge valve (6). Inspect the

protective cover gasket (7); replace if torn or

missing.

Figure 9-103 Transmission Solenoid (Upper Valve

Body Shown) Removal and Installation

3. Disconnect the internal wire connector (Fig. 9-103, 8)

from the solenoid valve that is being removed. Label

the internal wire connections if removing more than

one solenoid valve.

4. Remove the solenoid capscrew (Fig. 9-103, 9),

retaining plate (10) and flat washer (11) securing the

solenoid valve (6) to the transmission.

5. Remove the solenoid valve (Fig. 9-103, 6) and

replace.

MA8410

MT2300

1 2 ... 481 482 483 484 485 486 487 488 489 490 491 ... 543 544

Comments to this Manuals

No comments

Skytrak 6042 Service Manual User Manual Page 486

Comments to this Manuals

Related products and manuals for Special machinery Skytrak 6042 Service Manual