Skytrak 6042 Service Manual User Manual download pdf (Page 115)

100

101

3.69

Model 6042 Legacy Origin 7/02

Boom

3.6.3 Quick Attach Removal

1. Remove the elastic locknut (Fig. 3-153, 1) and

capscrew (2) holding the attachment tilt cylinder rod

end pin (3) to the quick attach assembly (4). Save

the capscrew and discard the elastic locknut.

2. Support the rod end of the attachment tilt cylinder.

Use a brass punch and rawhide hammer to remove

the rod end pin (Fig. 3-153, 3) from the quick attach

assembly.

3. Inspect the pin (Fig. 3-153, 3) for nicks or surface

corrosion. Use fine emery cloth to fix minor nicks or

corrosion. If damaged or if it cannot be repaired the

pin must be replaced.

Figure 3-153 Attachment Tilt Cylinder

Rod End Pin Removal

4. Remove the elastic locknut (Fig. 3-154, 1) and

capscrew (2) holding the quick attach pivot pin (3) to

the quick attach assembly (4). Save the capscrew

and discard the elastic locknut. Place a support

under the quick attach assembly to prevent it from

dropping when the pivot pin is removed.

5. Use a brass punch and rawhide hammer to remove

the quick attach pivot pin (Fig. 3-154, 3) from the

quick attach assembly and the bushings in the

gooseneck. Record the location and quantity of the

shim washers (5) as the pin is being removed. Save

the washers (6) from each side of the quick attach.

6. Inspect the pin (Fig. 3-154, 3) for nicks or surface

corrosion. Use fine emery cloth to repair minor nicks

or corrosion. If damaged or if it cannot be repaired,

the pin must be replaced.

Figure 3-154 Quick Attach Pivot Pin Removal

MH0940

MH0950

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 543 544

Comments to this Manuals

No comments

Skytrak 6042 Service Manual User Manual Page 115

Comments to this Manuals

Related products and manuals for Special machinery Skytrak 6042 Service Manual