Skytrak 6042 Service Manual User Manual download pdf (Page 144)

100

101

Cab and Covers

4.24

Model 6042 Legacy Origin 7/02

4.4.5 Door and Latches

1. Open and securely support the door assembly

(Fig. 4-39, 1).

2. Remove the strap (Fig. 4-39, 2), by slipping the

looped ends of the strap through the openings in the

“C” rings welded to the cab frame and door.

3. Remove the six caps (Fig. 4-39, 3) from the three

door hinge hex-head capscrews (4, 5 and 6) and

three hex nuts (7, 8 and 9).

4. Remove the hex nuts (Fig. 4-39, 7 and 8) from the

upper two door hinge hex-head capscrews (4 and 5).

5. Support the upper door section (Fig. 4-39, 10) and

remove the upper two door hinge hex-head

capscrews (4 and 5). Remove the upper door

section.

6. Remove the hex nut (Fig. 4-39, 9) and hex-head

capscrew (6). Remove the lower door section (11).

7. Remove two acorn nuts (Fig. 4-39, 12) two

lockwashers (13), two screws (14) and the female

door retainer (15).

8. Remove one acorn nut (Fig. 4-39, 16), one

lockwasher (17) and the door bumper (18).

Note: Record the position of the striker plate assembly

to ensure correct adjustment during installation.

9. Remove two lockscrews (Fig. 4-39, 19) and remove

the striker assembly (20) and nutplate (21).

10. Transfer all parts to the new cab.

Figure 4-39 Door and Latches

MA8760

1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 543 544

Comments to this Manuals

No comments

Skytrak 6042 Service Manual User Manual Page 144

Comments to this Manuals

Related products and manuals for Special machinery Skytrak 6042 Service Manual