Skytrak 6042 Service Manual User Manual Page 50

  • Download
  • Add to my manuals
  • Print
  • Page
    / 544
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 49
Boom
3.4
Model 6042 Legacy Origin 7/02
3.3.1 Inner Boom Removal
1. Remove any attachment from the quick attach
assembly. (Refer to Section 3.6.1, “Disconnecting
from an Attachment.”)
Note: This procedure will require a clear space of
approximately 16 feet at the front and rear of the vehicle.
2. Park the vehicle on a hard, level surface. Move the
boom to a horizontal (level) position. Extend (or
retract) the boom until the boom is extended
approximately two feet (610 mm). Retract the quick
attach front face (Fig. 3-1, 1) until it is parallel to the
ground (2). Place the travel select lever in the (N)
NEUTRAL position, place the neutral lock lever in
the (N) NEUTRAL LOCK position, engage the
parking brake and shut the engine OFF.
Figure 3-1 Quick Attach Parallel to Ground
3. Remove the thumbscrew (Fig. 3-2, 1),
lockwasher (2) and flat washer (3) holding the rear
cover (4) to the rear of the outer boom (5). Lift the
rear cover straight up until the capscrew in the top of
the cover clears the retaining hole in the top of the
outer boom. Remove the cover from the outer boom.
Figure 3-2 Rear Cover on Outer Boom
4. At the rear of the boom, measure the amount of
threads protruding beyond each elastic locknut
(Fig. 3-3, 1) and record that measurement for
reassembly. Loosen the two elastic locknuts (1)
holding both extend chain clevis’ to the anchor
plate (2) on the inner boom (3).
Figure 3-3 Extend Chain Locknuts
WARNING: Wear protective footwear
with reinforced toe caps and slip-resistant
soles. Failure to comply can result in foot or
other bodily injury from crushing, slipping or
falling.
WARNING: NEVER lift a heavy object
without the help of at least one assistant or a
suitable sling and hoist. Failure to comply can
result in death or serious personal injury.
MA10,0500
2
1
MA9820
3
2
1
5
4
MH1751
1
2
3
Page view 49
1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 543 544

Comments to this Manuals

No comments