Skytrak 6042 Service Manual User Manual download pdf (Page 88)

100

101

Boom

3.42

Model 6042 Legacy Origin 7/02

30. Assemble the two extend chains to the outer boom

mount if the yoke plates were removed from the

extend chains. If the yoke plates were not replaced,

proceed to Step 33.

31. Assemble the yoke plates (Fig. 3-90, 1) to the mount

on the front of the outer boom. Coat the shoulder

bolt (2), saved, with anti-seize compound and insert

the shoulder bolt through a yoke plate (1), the mount

on the boom and through a second yoke plate (1) on

the bottom. Secure in place with a new 1/2-13 elastic

locknut (3). Tighten the locknut securely; but the

yoke plates must pivot freely.

32. Assemble the clevis’ on the two extend chains

(Fig. 3-90, 4) between the yoke plates. Align the

holes in each clevis with the holes in the yoke plates.

Coat the hex socket head capscrews (5), saved, with

anti-seize compound and insert the capscrews

through the yoke plates and the clevis. Secure in

place with new 3/8-16 elastic locknuts (6). Tighten

the locknuts securely; but the extend chain clevis’

must pivot freely.

Figure 3-90 Extend Chains and Yoke Plates

33. Align the holes in the yoke plates (Fig. 3-91, 1) with

the hole in the mount on the outer boom. Coat the

shoulder bolt (2), saved, with anti-seize compound

and insert the shoulder bolt through the yoke plates

and the mount on the boom. Secure in place with a

new 1/2-13 elastic locknut (3). Tighten the locknut

securely; but the yoke plates must pivot freely.

Figure 3-91 Outer Boom Extend Chain Yoke Plates

34. Assemble the quick attach to the gooseneck. Align

the quick attach (Fig. 3-92, 1) between the mounts

on the gooseneck. Assemble a washer (2), saved,

on each side of the quick attach. Reassemble the

shims (3), saved, between the quick attach and the

gooseneck. DO NOT put all the shims on one side.

The quick attach should be centered in the gooseneck.

35. Coat the quick attach pivot pin (Fig. 3-92, 4) with

anti-seize compound. Insert the quick attach pivot

pin through the gooseneck, washers, shims and

quick attach. Use a tapered punch to align the hole

in the pivot pin with the hole in the quick attach.

Insert the 5/8-11 x 5" capscrew (5), saved, through

the quick attach and pin. Secure the capscrew in

place with a new 5/8-11 elastic locknut (6). Tighten

securely.

MA10,0600

MA10,0610

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 543 544

Comments to this Manuals

No comments

Skytrak 6042 Service Manual User Manual Page 88

Comments to this Manuals

Related products and manuals for Special machinery Skytrak 6042 Service Manual